Description

The Pre-Kote™ System is a cementitious coating system for swimming pool replastering and pebble finishes. It is a high quality, factory-prepared, cementitious precoating system that forms a hard, rough textured base coat that is tightly bonded to the interior walls and floors of concrete swimming pools and spas.

Pre-Kote™ Plaster Bond is available as a two-component system or as an all-in-one "Just Add Water" mix.

The two-component system is composed of a specially formulated Pre-Kote™ Liquid Resin and a blend of dry powder cement ingredients.

The Pre-Kote™ Instant has the resin already mixed in the bag of dry cement ingredients.

Pre-Kote™ actually becomes an integral part of the concrete pool or spa construction, increasing the surface adhesion and strength of the marcite and pebble finishes.

Coverage

• 350-500 sq.ft. per kit.
• Instant Kit: (3) 50-lb bags Pre-Kote™ Instant & Potable Water
• 2-Part Kit: (3) 50-lb bags Pre-Kote™ Original (Dry) & (1) 5-Gallon pail Pre-Kote™ Liquid

"Pop-offs" virtually eliminated. No expensive sandblasting. Reduces labor costs; increases profits. Unmatched warranty. Eliminates long repair down time. Eliminates removing existing plaster. Becomes an integral component of concrete pool and spa construction. Increases surface adhesion. Increases strength of marcite and pebble finishes.

Pre-Kote™ Systems: Product Info (191 KB) Pre-Kote™ Systems: Application Guide (213 KB)

Pre-Kote™ Systems: MSDS (225 KB)

Kover Krete™ Commercial Warranty (136 KB) Kover Krete™ Residential Warranty (147 KB)