Use

Liquid Release is designed for use on decorative concrete stamped overlays and fresh pour concrete projects.

Coverage

• Concrete - Approx. 200 sq.ft. per gallon
• Polymer Overlays - 175 sq.ft. per gallon

Description

Liquid Release is a clean parting agent between stamping tools and either polymer overlays or poured concrete. Although Liquid Release is used as a cleaner alternative for powder release agents when stamping concrete, it is a necessity when stamping polymer overlayments.

Liquid Release also prolongs tool life by decreasing the friction between the stamping mats and the concrete. Surface washing or removal of Liquid Release is not necessary, as this product will evaporate.

Application

Apply Liquid Release with a pump-up sprayer to the tools (usually once) and to the surface to be stamped. Only cover an area that can be stamped within approximately ten minutes or reapplication may be required.

Uniform coloring can be accomplished. Ideal for use in interiors where powder release is prohibitive. Allows you to see imprint when stamp tools are lifted in case retexturing is required.

Liquid Release: Product Manual (184 KB)

Liquid Release: MSDS (269 KB)

Kover Krete™ Commercial Warranty (136 KB) Kover Krete™ Residential Warranty (147 KB)