Description

Kover Gard™ SB is a durable masonry pigmented waterproofing coating, that when properly applied, is designed to penetrate into unpainted and/or unsealed cementitious surfaces. It’s special formulation of solvents, acrylic resin, silicone and color pigments not only add long lasting beauty to the surface, but also helps to seal the surface, so it fully protects the surface from powdering, and resists staining and moisture penetration.

It dries fast and has a low sheen so to minimize slipping when the surface area gets wet, provides excellent weather resistance, wear resistance and has superior color retention. It may be applied to surface areas previously coated with a similar concrete stain type product, but is not recommended for application over any other existing paint coatings. FOR EXTERIOR USE ONLY!

Kover Gard™ SB is suitable for application to the following properly prepared surfaces: brick, concrete, masonry walls, concrete block, poured and precast concrete, stucco, walkways, patios, tennis courts, shuffleboard courts, carport floors, garage floors, driveways, and pool decks.

SPECIAL NOTE: Tire tracking may occur with lighter colors applied to driveways, carport and garage floors.

Kover Krete™ Non-Skid™ may be added to Kover Gard™ SB for areas such as stairways, walkways, and areas where wet surfaces may cause slippery conditions.

Coverage

Porous Surfaces and First Coats - 75-150 sq.ft. per gallon
Smooth Surfaces and Second Coats - 100-225 sq.ft. per gallon