Description

Poof!™ makes hardened concrete disappear.

Application

Completely saturate area of dry, hardened concrete to be removed with Poof!™ via sprayer or soft brush. Do not dilute! Concrete will turn white upon contact, then darken. If allowed to evaporate, white residue will appear. Do not rinse! Re-apply Poof!™ to reactivate as needed until concrete is softened.

Allow Poof!™ to pentrate 10-15 minutes. After 10-15 minutes, reapply to the same area. Keep surface wet with Poof!™. Concrete will begin to soften and pull away from cleaned surface (approx. 20-30 minutes).

Rinse with water pressure thoroughly. On extra thick buildup, repeat cleaning directions until buildup is soft.

Surface & Air Temperatures

Do not clean with any type of product when temperatures are below freezing or extremely hot from direct sunlight. Best cleaning results are obtained when air and surface temperatures are 40° F to 80° F. Hot surface temperature may cause scorching.

Pre-testing

Always test prior to beginning full-scale cleaning operations. Testing should confirm cleaning effectiveness on each type of surface being cleaned. Test also to determine the desired surface contact time and potential for adverse reactions with application. Allow test panels to dry thoroughly before evaluating final appearance and results.